Climate zone
4

Warm temperate (Zone 4)

Wind region
A

V₅₀₀ ≈ 45 m/s

Nearest port
Melbourne

~315 km by road

Starting price
$7,900

USD · FOB Shenzhen

Climate zone, wind region and port distance are indicative regional information. Confirm what applies to your lot with local experts.

The expandable container home.
Unfolded and ready
Large interior living space in a container home.
Inside
The expandable container home in folded and compact form.
Folded for shipping

While client information is confidential, you can explore some of our previous projects to see the quality and variety of homes we have delivered.

Local guide

A container home in Albury-Wodonga: two states, one river

Albury is in New South Wales and Wodonga in Victoria, either side of the Murray. They share a port and a highway, but not a council, a planning system or even a climate zone.

Up the Hume from Melbourne

The Port of Melbourne is the nearer container port by a wide margin: about 315 km to either town, via CityLink and the Hume Freeway. Port Botany is about 550 km away, up the Hume Highway from Sydney.

The home arrives folded inside a 40' high-cube container, two homes to a container. The folded unit is 5.8 m long and 2.15 m wide, and the roof frame has crane fittings, so plan where a truck and crane can stand on site.

Which rules, which council

Albury (NSW). A container home as the main house needs a development application to Albury City Council followed by a construction certificate, or a complying development certificate, which covers both, where the lot qualifies; either way it must meet the Building Code of Australia. As a granny flat beside an existing house, the Housing SEPP allows up to 60 m². Ask the council whether it will treat a factory-built home as a dwelling or as a manufactured home, which needs a separate approval under section 68 of the Local Government Act.

Wodonga (Victoria). The City of Wodonga deals with planning permits, which are needed only where the zone or an overlay requires one, and a registered building surveyor issues the building permit. Beside an existing house, Victoria's small second dwelling rules allow a self-contained home of up to 80 m² without a planning permit in most residential and rural zones.

Two climate zones

The ABCB climate map puts Albury in NCC zone 4 (hot, dry summers, cool winters) and Wodonga in zone 6 (mild temperate). The zone sets the energy-efficiency targets your building surveyor or certifier checks the design against, so the same home may need different insulation on each side of the river. Konbuild's walls start at 50 mm EPS (R 1.315) and go up to 75 mm PU (R 3.125).

Both states map bushfire risk lot by lot: New South Wales through the Rural Fire Service's bush fire prone land check, Victoria through the Bushfire Prone Area and Bushfire Management Overlay shown in a VicPlan property report.

Sources, checked November 2026

Rules change and every lot is different. Confirm what applies to your land with your council and a registered building surveyor or certifier before you order.

What we do

Custom container homes in Albury-Wodonga, New South Wales and Victoria

Design and manufacturing

Custom homes built to your specifications.

Local compliance

Assistance with complying with local plumbing, electrical, and building regulations.

Affordable solutions

Quality homes manufactured in China to help you avoid local tradesman shortages.

Our goal is to help you build your community, whether it's for your family, a series of Airbnb units, or affordable accommodation for a loved one.

Climate in Albury-Wodonga

Albury-Wodonga falls in Warm temperate (Zone 4): hot dry summer, cool winter. We take local climate conditions into account, and the panelling can be selected to suit — 50 mm EPS (R = 1.315 m²K/W) is standard, with upgrades to 50 mm PU (R = 2.083), 75 mm PU (R = 3.125) or 50 mm Silica Rock (R = 1.25). For developed countries we recommend the Silica Rock panels.

Wind — Region A — Normal

Albury-Wodonga is in AS/NZS 1170.2 Region A — Normal, the standard wind region covering most of inland and southern coastal Australia (design wind speed V₅₀₀ ≈ 45 m/s). Confirm the tie-down and bracing your site needs with a local engineer or certifier. Everything we build must meet, or exceed, your country's building codes.

Bushfire (BAL) considerations

Parts of this region are designated bushfire-prone, and a BAL (bushfire attack level) assessment may be required as part of your building approval. Check your council's bushfire-prone area map, and tell us early if your lot has a BAL rating.

Delivery

Getting a home from China to Albury-Wodonga

Each expandable home ships from Shenzhen in a 40' high-cube container, and two homes fit in one container. The nearest major container port to Albury-Wodonga is Port of Melbourne, about 315 km away by road. We recommend budgeting around USD $1,000–$2,500 for shipping to your nearest port — this does not include customs charges and import taxes. You must hire a customs broker in your country, who should also help with logistics from the port to your site.

Delivery time 90 days after deposit
Ships from Shenzhen · 40' HC
Homes per container 2
Nearest container port Port of Melbourne
Port to site ~315 km by road
Planning approval

Planning approval in New South Wales and Victoria

It's essential to engage with your local council to obtain all the necessary planning and building permits. Our guidance in this area is limited, but we can provide general advice to help your project comply with local regulations. Albury is in New South Wales and Wodonga in Victoria, so the rules that apply depend on which side of the Murray River your lot is on. New South Wales's planning information is published on the NSW Planning website, and Victoria's on the Victoria Planning Portal.

The product

Konbuild container homes

Our expandable container homes fit two to a standard 40' high-cube shipping container and expand on site to give you 34 m² (365 sq ft) of living space. The Oslo is USD $7,900, the Oslo Grand — with kitchen and bathroom fittings — is USD $8,900, and the Oslo Lux is built on a high-grade aluminium frame.

Typical use cases: Permanent residence · Granny flat · Holiday cabin · Airbnb unit.

Konbuild models that fit this brief: Oslo, Oslo Grand, Oslo Lux, Oslo Tiny Home.

More about container homes →

The Oslo at a glance

Floor area
34 m² (365 sq ft)
Unfolded
5,800 × 6,580 × 2,500 mm external
Folded for shipping
5,800 × 2,150 × 2,500 mm external
Walls
50 mm colour-coated steel EPS sandwich panels (standard)
Electrical
Distribution box with breakers (1 pc); 12 V LED lights; Power points, data cable, switches and wiring laid out to the customer's requirements
Warranty
1-year limited warranty
Delivery time
90 days after we receive the deposit

The starting price of $7,900 USD is for the Oslo, FOB Shenzhen. Full specification →

Questions

FAQs about container homes in Albury-Wodonga

Which port should a container home for Albury-Wodonga ship to?
Melbourne. The Port of Melbourne is about 315 km from Albury and Wodonga via the Hume Freeway; Port Botany is about 550 km.
Are Albury and Wodonga in the same climate zone?
No. The ABCB climate zone map puts Albury in NCC zone 4 and Wodonga in zone 6, which can change the insulation a home needs to meet the energy-efficiency rules.
What are the local building regulations for container homes in Albury-Wodonga?
While our team can offer general advice on local regulations, it's essential to engage with local experts to ensure your home complies with all necessary standards. Albury is in New South Wales and Wodonga in Victoria, so the rules that apply depend on which side of the Murray River your lot is on. New South Wales's planning information is on the NSW Planning website, and Victoria's on the Victoria Planning Portal.
How does the climate in Albury-Wodonga affect container home construction?
We take local climate conditions into account to ensure your home is built to withstand the specific environmental factors of Albury-Wodonga, which is in Warm temperate (Zone 4) and wind Region A — Normal. Panelling can be selected to suit: 50 mm EPS (R = 1.315 m²K/W) is standard, with upgrades to 50 mm PU (R = 2.083), 75 mm PU (R = 3.125) or 50 mm Silica Rock (R = 1.25).
What are the benefits of choosing a container home over traditional construction in Albury-Wodonga?
Container Homes are typically more affordable, quicker to construct, and can be customised to meet your specific needs, all while avoiding the local tradesman shortage.
How does a container home get to Albury-Wodonga?
Homes ship from Shenzhen in a 40' high-cube container, two to a container. The nearest major container port to Albury-Wodonga is Port of Melbourne, about 315 km away by road. Budget around USD $1,000–$2,500 for shipping to your nearest port, not including customs charges and import taxes, and hire a customs broker to handle clearance and transport from the port.
How big is the home?
34 square metres, which is equal to 365 square feet. Opened out it measures 5,800 × 6,580 × 2,500 mm externally; closed for shipping it is 5,800 × 2,150 × 2,500 mm.
Is the home insulated?
Yes. Each panel has a foam core that provides insulation: 50 mm EPS (R = 1.315 m²K/W) is standard, with upgrades to 50 mm PU (R = 2.083), 75 mm PU (R = 3.125) or 50 mm Silica Rock (R = 1.25). The panelling can be selected for whichever meets your needs best. For developed countries we recommend the Silica Rock panels, and you can upgrade the panelling for better insulation in cold climates.
How much is shipping?
We recommend budgeting around USD $1,000–$2,500 for shipping to your nearest port. This price does not include customs charges and import taxes. Each expandable home ships in a 40' high-cube container, and you can fit two homes in one container. To work out an estimate, price a 40' HC full container load from Shenzhen to your nearest port with a freight calculator such as Freightos.
Get in touch about Albury-Wodonga

Ready to build your container home in Albury-Wodonga?

Contact us today for a free consultation. Our team is here to help you every step of the way.