Granny Flat in Port Macquarie, New South Wales
Konbuild brings affordable, high-quality granny flats to Port Macquarie, New South Wales, helping you overcome the local tradesman shortage. We manufacture homes in China and work closely with you, the importer. Port Macquarie is in climate zone 5 and AS/NZS 1170.2 Region A — Normal; the nearest major container port is Port Botany, about 400 km away by road.
Warm temperate coastal (Zone 5)
V₅₀₀ ≈ 45 m/s
~400 km by road
USD · FOB Shenzhen
Climate zone, wind region and port distance are indicative regional information. Confirm what applies to your lot with local experts.
While client information is confidential, you can explore some of our previous projects to see the quality and variety of homes we have delivered.
A granny flat in Port Macquarie
Port Macquarie is a long haul from the nearest container port, and its recent run of floods makes the lot itself the first thing to check.
Up the Pacific Highway
Port Botany is about 400 km away: the M1 Pacific Motorway north of Sydney, the Pacific Highway, then the Oxley Highway into town. The Port of Brisbane is further, at about 550 km.
A granny flat usually goes into a backyard, so plan the last few metres first. The home travels folded, 5.8 m long and 2.15 m wide, two to a 40' high-cube container, and the roof frame has crane fittings; on standard ground it stands on 8 to 12 concrete piers.
The NSW granny flat rules
Under the state's Housing SEPP, a secondary dwelling of up to 60 m² can be built beside a house in a residential zone (the Oslo is 34 m²), and the lot cannot then be subdivided. It can be approved by development application to Port Macquarie-Hastings Council, or by a complying development certificate from the council or a registered certifier.
The complying development route needs a residential zone other than R5, a lot of at least 450 m², at least 12 m of frontage for lots up to 900 m², and lawful access to a public road, with limits on the total floor area and site coverage. Ask the council early whether it treats a factory-built home as a dwelling or as a manufactured home, which needs a separate approval under section 68 of the Local Government Act.
NSW rules for secondary dwellings →NSW Planning website →Check bush fire prone land (NSW RFS) →
Floods and fire
Port Macquarie is in NCC climate zone 5, warm temperate, and a non-cyclonic wind region. Port Macquarie-Hastings Council records four major floods between March 2021 and July 2022, including a 1-in-100-year flood in March 2021, so check your lot's flood planning information before you commit.
Bushland edges are mapped as bush fire prone land: a complying development certificate on mapped land must conform to Planning for Bush Fire Protection. Close to the beaches, salt exposure affects which steel finishes suit, so tell us how near the coast you are.
Sources, checked November 2026
- Road route, Port Botany to Port Macquarie (OpenStreetMap)
- Road route, Port of Brisbane (Fisherman Islands) to Port Macquarie (OpenStreetMap)
- State Environmental Planning Policy (Housing) 2021, NSW legislation
- NSW Planning: secondary dwellings
- NSW Government: approvals for building or renovating a home
- Local Government Act 1993 (NSW), section 68
- ABCB climate zone map
- Port Macquarie-Hastings Council: flood recovery
- NSW Rural Fire Service: Planning for Bush Fire Protection
- NSW Rural Fire Service: check if you're in bush fire prone land
Rules change and every lot is different. Confirm what applies to your land with your council and a registered building surveyor or certifier before you order.
Custom granny flats in Port Macquarie, New South Wales
Design and manufacturing
Custom homes built to your specifications.
Local compliance
Assistance with complying with local plumbing, electrical, and building regulations.
Affordable solutions
Quality homes manufactured in China to help you avoid local tradesman shortages.
Our goal is to help you build your community, whether it's for your family, a series of Airbnb units, or affordable accommodation for a loved one.
Climate in Port Macquarie
Port Macquarie falls in Warm temperate coastal (Zone 5): warm temperate, mild year-round. We take local climate conditions into account, and the panelling can be selected to suit — 50 mm EPS (R = 1.315 m²K/W) is standard, with upgrades to 50 mm PU (R = 2.083), 75 mm PU (R = 3.125) or 50 mm Silica Rock (R = 1.25). For developed countries we recommend the Silica Rock panels.
Wind — Region A — Normal
Port Macquarie is in AS/NZS 1170.2 Region A — Normal, the standard wind region covering most of inland and southern coastal Australia (design wind speed V₅₀₀ ≈ 45 m/s). Confirm the tie-down and bracing your site needs with a local engineer or certifier. Everything we build must meet, or exceed, your country's building codes.
Bushfire (BAL) considerations
Parts of this region are designated bushfire-prone, and a BAL (bushfire attack level) assessment may be required as part of your building approval. Check your council's bushfire-prone area map, and tell us early if your lot has a BAL rating.
Getting a home from China to Port Macquarie
Each expandable home ships from Shenzhen in a 40' high-cube container, and two homes fit in one container. The nearest major container port to Port Macquarie is Port Botany, about 400 km away by road. We recommend budgeting around USD $1,000–$2,500 for shipping to your nearest port — this does not include customs charges and import taxes. You must hire a customs broker in your country, who should also help with logistics from the port to your site.
Planning approval in New South Wales
It's essential to engage with your local council to obtain all the necessary planning and building permits. Our guidance in this area is limited, but we can provide general advice to help your project comply with local regulations. New South Wales's planning information is published on the NSW Planning website.
Konbuild granny flats
An expandable container home can serve as a granny flat — affordable accommodation for a loved one. The Oslo Grand arrives with a kitchen cabinet and sink, toilet, shower and basin, and opens out to 34 m² (365 sq ft). The Solo Lux one-bedroom cabin is another option.
Typical use cases: Accommodation for a relative · Multi-generational living · Guest house.
Konbuild models that fit this brief: Oslo, Oslo Grand, Oslo Lux, Solo Lux.
The Oslo at a glance
- Floor area
- 34 m² (365 sq ft)
- Unfolded
- 5,800 × 6,580 × 2,500 mm external
- Folded for shipping
- 5,800 × 2,150 × 2,500 mm external
- Walls
- 50 mm colour-coated steel EPS sandwich panels (standard)
- Electrical
- Distribution box with breakers (1 pc); 12 V LED lights; Power points, data cable, switches and wiring laid out to the customer's requirements
- Warranty
- 1-year limited warranty
- Delivery time
- 90 days after we receive the deposit
The starting price of $7,900 USD is for the Oslo, FOB Shenzhen. Full specification →
FAQs about granny flats in Port Macquarie
How big can a granny flat be in Port Macquarie?
Which port is closest to Port Macquarie?
What are the local building regulations for granny flats in Port Macquarie?
How does the climate in Port Macquarie affect granny flat construction?
What are the benefits of choosing a granny flat over traditional construction in Port Macquarie?
How does a granny flat get to Port Macquarie?
What do I need to pay for on top of the home?
Why is the price higher for developed countries?
What kind of foundation do I need?
Ready to build your granny flat in Port Macquarie?
Contact us today for a free consultation. Our team is here to help you every step of the way.