Tiny Home in Hervey Bay, Queensland
Konbuild brings affordable, high-quality tiny homes to Hervey Bay, Queensland, helping you overcome the local tradesman shortage. We manufacture homes in China and work closely with you, the importer. Hervey Bay is in climate zone 2 and AS/NZS 1170.2 Region B — Intermediate; the nearest major container port is Port of Brisbane, about 300 km away by road.
Subtropical (Zone 2)
V₅₀₀ ≈ 57 m/s
~300 km by road
USD · FOB Shenzhen
Climate zone, wind region and port distance are indicative regional information. Confirm what applies to your lot with local experts.
While client information is confidential, you can explore some of our previous projects to see the quality and variety of homes we have delivered.
A tiny home in Hervey Bay
Hervey Bay sits just south of Queensland's cyclonic wind region, a 300 km run from the Port of Brisbane, and Queensland's planning rules have room for small homes.
Up the Bruce Highway
The Port of Brisbane is about 300 km away, via the Gateway Motorway, the Bruce Highway and the Maryborough–Hervey Bay Road.
The Oslo, the expandable home in Konbuild's tiny home range, travels folded in a 40' high-cube container, two to a container, and opens out on site onto piers.
Tiny homes under Queensland rules
Queensland's guidance separates two kinds of tiny home. One on wheels, registered as a caravan, used temporarily and not connected to services is a caravan, and council local laws apply. Used as a permanent home, it is a dwelling.
Konbuild's Oslo Tiny Home is designed to be movable, but lived in permanently it is a dwelling too, as is the Oslo on its piers. As the only home on a lot or as a secondary dwelling, no planning approval is needed where it meets the criteria in the Planning Regulation; otherwise Fraser Coast Regional Council's planning scheme applies. It needs building approval under the Building Act 1975 and plumbing and drainage approval either way. A secondary dwelling can be rented to anyone.
Queensland's tiny homes guidance →Queensland secondary dwelling rules →
On the edge of cyclone country
Geoscience Australia's data for the 2021 edition of AS/NZS 1170.2 puts Hervey Bay and Maryborough in Region B1, which is not cyclonic, while Bundaberg, to the north, is in cyclonic Region C. Have your engineer confirm the region for your lot from the Standard.
The ABCB map puts Hervey Bay in NCC climate zone 2: warm, humid summers and mild winters. Near the water, tell us how close to the shore you are, as salt exposure affects which steel finishes suit.
Sources, checked November 2026
- Road route, Port of Brisbane (Fisherman Islands) to Hervey Bay (OpenStreetMap)
- Queensland Government: tiny homes
- Queensland Government: secondary dwellings (granny flats)
- Geoscience Australia, AS/NZS 1170.2:2021 wind regions dataset (indicative, not for design)
- Queensland Reconstruction Authority: cyclone resilient building guidance (2019)
- ABCB climate zone map
Rules change and every lot is different. Confirm what applies to your land with your council and a registered building surveyor or certifier before you order.
Custom tiny homes in Hervey Bay, Queensland
Design and manufacturing
Custom homes built to your specifications.
Local compliance
Assistance with complying with local plumbing, electrical, and building regulations.
Affordable solutions
Quality homes manufactured in China to help you avoid local tradesman shortages.
Our goal is to help you build your community, whether it's for your family, a series of Airbnb units, or affordable accommodation for a loved one.
Climate in Hervey Bay
Hervey Bay falls in Subtropical (Zone 2): warm humid summer, mild winter. We take local climate conditions into account, and the panelling can be selected to suit — 50 mm EPS (R = 1.315 m²K/W) is standard, with upgrades to 50 mm PU (R = 2.083), 75 mm PU (R = 3.125) or 50 mm Silica Rock (R = 1.25). For developed countries we recommend the Silica Rock panels.
Wind — Region B — Intermediate
Hervey Bay is in AS/NZS 1170.2 Region B — Intermediate, a non-cyclonic region with higher design wind speeds, covering the NSW north coast and much of south-east Queensland (design wind speed V₅₀₀ ≈ 57 m/s). Confirm the tie-down and bracing your site needs with a local engineer or certifier. Everything we build must meet, or exceed, your country's building codes.
Bushfire (BAL) considerations
Bushfire risk is generally lower in this warm, humid region, but dry-season grass fires do occur and bush-edge lots can still be mapped as bushfire-prone. Check your council's bushfire-prone area map.
Getting a home from China to Hervey Bay
Each expandable home ships from Shenzhen in a 40' high-cube container, and two homes fit in one container. The nearest major container port to Hervey Bay is Port of Brisbane, about 300 km away by road. We recommend budgeting around USD $1,000–$2,500 for shipping to your nearest port — this does not include customs charges and import taxes. You must hire a customs broker in your country, who should also help with logistics from the port to your site.
Planning approval in Queensland
It's essential to engage with your local council to obtain all the necessary planning and building permits. Our guidance in this area is limited, but we can provide general advice to help your project comply with local regulations. Queensland's planning information is published on the Queensland Planning website.
Konbuild tiny homes
The Oslo Tiny Home is expandable, transportable and comfortable — for those looking for something movable, and to make things easier where planning codes are strict.
Typical use cases: Movable home · Studio or first home · Backyard tiny home.
Konbuild models that fit this brief: Oslo Tiny Home, Oslo.
The Oslo at a glance
- Floor area
- 34 m² (365 sq ft)
- Unfolded
- 5,800 × 6,580 × 2,500 mm external
- Folded for shipping
- 5,800 × 2,150 × 2,500 mm external
- Walls
- 50 mm colour-coated steel EPS sandwich panels (standard)
- Electrical
- Distribution box with breakers (1 pc); 12 V LED lights; Power points, data cable, switches and wiring laid out to the customer's requirements
- Warranty
- 1-year limited warranty
- Delivery time
- 90 days after we receive the deposit
The starting price of $7,900 USD is for the Oslo, FOB Shenzhen. Full specification →
FAQs about tiny homes in Hervey Bay
Is Hervey Bay in a cyclone region?
Does a tiny home in Hervey Bay need approval?
What are the local building regulations for tiny homes in Hervey Bay?
How does the climate in Hervey Bay affect tiny home construction?
What are the benefits of choosing a tiny home over traditional construction in Hervey Bay?
How does a tiny home get to Hervey Bay?
Can the home be moved easily?
How big is the home?
Can I add a wood burner? What heating is there?
Ready to build your tiny home in Hervey Bay?
Contact us today for a free consultation. Our team is here to help you every step of the way.