Transportable Building in Perth, Western Australia
Konbuild brings affordable, high-quality transportable buildings to Perth, Western Australia, helping you overcome the local tradesman shortage. We manufacture homes in China and work closely with you, the importer. Perth is in climate zone 5 and AS/NZS 1170.2 Region A — Normal; the nearest major container port is Fremantle Port, about 20 km away by road.
Warm temperate coastal (Zone 5)
V₅₀₀ ≈ 45 m/s
~20 km by road
USD · FOB Shenzhen
Climate zone, wind region and port distance are indicative regional information. Confirm what applies to your lot with local experts.
While client information is confidential, you can explore some of our previous projects to see the quality and variety of homes we have delivered.
Transportable buildings in Perth
A transportable building in Perth might be a site office, a studio, staff accommodation or a home. Western Australia's rules turn on what it is used for and where it stands, more than on how it was built.
From Fremantle
Fremantle Port's North Quay container terminals are about 20 km from the city centre by road, via Stirling Highway or via Canning Highway and the Kwinana Freeway.
Each Konbuild unit ships folded in a 40' high-cube container, two to a container. Folded, it is 5.8 m long, 2.15 m wide and 2.5 m high, and the roof frame has crane fittings for lifting it into place.
Approval depends on the use
A temporary office, shed or sanitary facility used by a builder for building work on the same land needs no building permit under the Building Regulations 2012. Workforce accommodation on a mining tenement or under a State Agreement Act typically needs no development approval either.
Anything else (an office, studio, classroom or accommodation that stays) needs development approval where the local planning scheme requires it, and a building permit from the local government. The Building Regulations also set standards for buildings that are relocated and reassembled. If the building is a granny flat beside a house, the R-Codes allow up to 70 m², without development approval when it meets the deemed-to-comply standards.
WA Tiny House Typologies Guide →WA bush fire prone areas (DFES) →
Bushfire mapping first
Perth is in NCC climate zone 5, warm temperate, and a non-cyclonic wind region, so the design questions are usually about heat and fire rather than wind. Check the site on WA's Map of Bush Fire Prone Areas: much of the metropolitan fringe is mapped, and on a mapped lot State Planning Policy 3.7 and the Building Code's bushfire requirements apply.
Sources, checked November 2026
- Road route, Fremantle Port (North Quay) to Perth (OpenStreetMap)
- Building Regulations 2012 (WA)
- WA Planning Commission: Tiny House Typologies Guide (December 2024)
- Residential Design Codes Volume 1 (April 2026)
- ABCB climate zone map
- Geoscience Australia, AS/NZS 1170.2:2021 wind regions dataset (indicative, not for design)
- DFES: bush fire prone areas in Western Australia
Rules change and every lot is different. Confirm what applies to your land with your council and a registered building surveyor or certifier before you order.
Custom transportable buildings in Perth, Western Australia
Design and manufacturing
Custom homes built to your specifications.
Local compliance
Assistance with complying with local plumbing, electrical, and building regulations.
Affordable solutions
Quality homes manufactured in China to help you avoid local tradesman shortages.
Our goal is to help you build your community, whether it's for your family, a series of Airbnb units, or affordable accommodation for a loved one.
Climate in Perth
Perth falls in Warm temperate coastal (Zone 5): warm temperate, mild year-round. We take local climate conditions into account, and the panelling can be selected to suit — 50 mm EPS (R = 1.315 m²K/W) is standard, with upgrades to 50 mm PU (R = 2.083), 75 mm PU (R = 3.125) or 50 mm Silica Rock (R = 1.25). For developed countries we recommend the Silica Rock panels.
Wind — Region A — Normal
Perth is in AS/NZS 1170.2 Region A — Normal, the standard wind region covering most of inland and southern coastal Australia (design wind speed V₅₀₀ ≈ 45 m/s). Confirm the tie-down and bracing your site needs with a local engineer or certifier. Everything we build must meet, or exceed, your country's building codes.
Bushfire (BAL) considerations
Many lots in this region carry significant bushfire risk, and a BAL (bushfire attack level) assessment is commonly required. Check your council's bushfire-prone area map, and tell us early if your lot has a BAL rating.
Getting a home from China to Perth
Each expandable home ships from Shenzhen in a 40' high-cube container, and two homes fit in one container. The nearest major container port to Perth is Fremantle Port, about 20 km away by road. We recommend budgeting around USD $1,000–$2,500 for shipping to your nearest port — this does not include customs charges and import taxes. You must hire a customs broker in your country, who should also help with logistics from the port to your site.
Planning approval in Western Australia
It's essential to engage with your local council to obtain all the necessary planning and building permits. Our guidance in this area is limited, but we can provide general advice to help your project comply with local regulations. Western Australia's planning information is published on the WA Department of Planning website.
Konbuild transportable buildings
Our design fits directly into a shipping container, which lets us use existing logistics infrastructure all the way to your nearest port. Each home ships in a 40' high-cube container — two fit in one — and on arrival it is folded out into a new home.
Typical use cases: Remote sites · Workers' accommodation · Site offices.
Konbuild models that fit this brief: Oslo, Oslo Grand.
The Oslo at a glance
- Floor area
- 34 m² (365 sq ft)
- Unfolded
- 5,800 × 6,580 × 2,500 mm external
- Folded for shipping
- 5,800 × 2,150 × 2,500 mm external
- Walls
- 50 mm colour-coated steel EPS sandwich panels (standard)
- Electrical
- Distribution box with breakers (1 pc); 12 V LED lights; Power points, data cable, switches and wiring laid out to the customer's requirements
- Warranty
- 1-year limited warranty
- Delivery time
- 90 days after we receive the deposit
The starting price of $7,900 USD is for the Oslo, FOB Shenzhen. Full specification →
FAQs about transportable buildings in Perth
Does a temporary site office in WA need a building permit?
How far is Fremantle Port from central Perth?
What are the local building regulations for transportable buildings in Perth?
How does the climate in Perth affect transportable building construction?
What are the benefits of choosing a transportable building over traditional construction in Perth?
How does a transportable building get to Perth?
How much is shipping?
What is the weight of the Oslo Grand?
It's my first time importing from China. What do I need to do?
Ready to build your transportable building in Perth?
Contact us today for a free consultation. Our team is here to help you every step of the way.