Kit Home in Sunshine Coast, Queensland
Konbuild brings affordable, high-quality kit homes to Sunshine Coast, Queensland, helping you overcome the local tradesman shortage. We manufacture homes in China and work closely with you, the importer. Sunshine Coast is in climate zone 2 and AS/NZS 1170.2 Region B — Intermediate; the nearest major container port is Port of Brisbane, about 115 km away by road.
Subtropical (Zone 2)
V₅₀₀ ≈ 57 m/s
~115 km by road
USD · FOB Shenzhen
Climate zone, wind region and port distance are indicative regional information. Confirm what applies to your lot with local experts.
While client information is confidential, you can explore some of our previous projects to see the quality and variety of homes we have delivered.
A kit home on the Sunshine Coast
A kit home on the Sunshine Coast is usually headed for acreage in the hinterland or a block near the beach, and the approval and the delivery both depend on which.
From the Port of Brisbane
The Port of Brisbane is about 115 km from Maroochydore by road: the Gateway Motorway, the Bruce Highway and the Sunshine Motorway. Hinterland lots are further inland, and access can be steep.
Konbuild's homes travel folded in a 40' high-cube container, two to a container. Check that a truck carrying a 40' container can reach your lot before delivery is booked.
Approval in Queensland
Every new home in Queensland needs building approval from a private certifier, licensed by the Queensland Building and Construction Commission, plus plumbing and drainage approval. Where a house meets the Planning Regulation's criteria, no planning approval is needed; otherwise Sunshine Coast Council's planning scheme applies (Noosa has its own council and scheme).
On a lot with an existing house, a secondary dwelling can be rented to anyone. The Queensland Housing Code, which commenced on 1 September 2026, sets a default maximum floor area of 50 m² for a secondary dwelling on lots under 1,000 m² and 60 m² on larger lots, and councils can set higher limits; ask your certifier which applies.
Queensland secondary dwelling rules →Queensland's tiny homes guidance →
Hinterland and coast
The coast and hinterland towns are in NCC climate zone 2, warm and humid, and wind Region B1, which is not cyclonic.
In the hinterland, check the bushfire layer in the state's planning mapping or the council's planning scheme. On the coast, tell us how close to the surf your lot is, as salt exposure affects which steel finishes suit.
Sources, checked November 2026
- Road route, Port of Brisbane (Fisherman Islands) to Maroochydore (OpenStreetMap)
- Queensland Government: tiny homes
- Queensland Government: secondary dwellings (granny flats)
- Queensland Housing Code (commenced 1 September 2026)
- ABCB climate zone map
- Geoscience Australia, AS/NZS 1170.2:2021 wind regions dataset (indicative, not for design)
- Queensland Government: State Planning Policy mapping
Rules change and every lot is different. Confirm what applies to your land with your council and a registered building surveyor or certifier before you order.
Custom kit homes in Sunshine Coast, Queensland
Design and manufacturing
Custom homes built to your specifications.
Local compliance
Assistance with complying with local plumbing, electrical, and building regulations.
Affordable solutions
Quality homes manufactured in China to help you avoid local tradesman shortages.
Our goal is to help you build your community, whether it's for your family, a series of Airbnb units, or affordable accommodation for a loved one.
Climate in Sunshine Coast
Sunshine Coast falls in Subtropical (Zone 2): warm humid summer, mild winter. We take local climate conditions into account, and the panelling can be selected to suit — 50 mm EPS (R = 1.315 m²K/W) is standard, with upgrades to 50 mm PU (R = 2.083), 75 mm PU (R = 3.125) or 50 mm Silica Rock (R = 1.25). For developed countries we recommend the Silica Rock panels.
Wind — Region B — Intermediate
Sunshine Coast is in AS/NZS 1170.2 Region B — Intermediate, a non-cyclonic region with higher design wind speeds, covering the NSW north coast and much of south-east Queensland (design wind speed V₅₀₀ ≈ 57 m/s). Confirm the tie-down and bracing your site needs with a local engineer or certifier. Everything we build must meet, or exceed, your country's building codes.
Bushfire (BAL) considerations
Bushfire risk is generally lower in this warm, humid region, but dry-season grass fires do occur and bush-edge lots can still be mapped as bushfire-prone. Check your council's bushfire-prone area map.
Getting a home from China to Sunshine Coast
Each expandable home ships from Shenzhen in a 40' high-cube container, and two homes fit in one container. The nearest major container port to Sunshine Coast is Port of Brisbane, about 115 km away by road. We recommend budgeting around USD $1,000–$2,500 for shipping to your nearest port — this does not include customs charges and import taxes. You must hire a customs broker in your country, who should also help with logistics from the port to your site.
Planning approval in Queensland
It's essential to engage with your local council to obtain all the necessary planning and building permits. Our guidance in this area is limited, but we can provide general advice to help your project comply with local regulations. Queensland's planning information is published on the Queensland Planning website.
Konbuild kit homes
Our expandable homes leave the factory built and fold out on site. If you want a true kit, the Solo Lux one-bedroom cabin comes as a kit in a 40-foot container, ready for assembly — a DIY enthusiast can construct the home themselves, hiring local trades only where necessary.
Typical use cases: Owner-built home · Holiday house · Rural retreat.
Konbuild models that fit this brief: Oslo, Oslo Grand, Solo Lux.
The Oslo at a glance
- Floor area
- 34 m² (365 sq ft)
- Unfolded
- 5,800 × 6,580 × 2,500 mm external
- Folded for shipping
- 5,800 × 2,150 × 2,500 mm external
- Walls
- 50 mm colour-coated steel EPS sandwich panels (standard)
- Electrical
- Distribution box with breakers (1 pc); 12 V LED lights; Power points, data cable, switches and wiring laid out to the customer's requirements
- Warranty
- 1-year limited warranty
- Delivery time
- 90 days after we receive the deposit
The starting price of $7,900 USD is for the Oslo, FOB Shenzhen. Full specification →
FAQs about kit homes in Sunshine Coast
Who approves a kit home on the Sunshine Coast?
How big can a secondary dwelling be in Queensland?
What are the local building regulations for kit homes in Sunshine Coast?
How does the climate in Sunshine Coast affect kit home construction?
What are the benefits of choosing a kit home over traditional construction in Sunshine Coast?
How does a kit home get to Sunshine Coast?
What do I need to pay for on top of the home?
It's my first time importing from China. What do I need to do?
What kind of foundation do I need?
Ready to build your kit home in Sunshine Coast?
Contact us today for a free consultation. Our team is here to help you every step of the way.